Stray Outlander Robot Heads for Lucky 13

I wanted to make some head skins for Lucky 13 from the game Stray since they look so much alike. I recommend you print the heads in as high of quality you can, with seams set to random and without supports. The heads should be oriented on the short flat 45 degree section at the back of the top of the head to print without supports. This might not be possible if you don't have good bed adhesion. If that's the case a “face up” orientation should work with supports. I've also added the Fusion 360 model of the blank head so that you can make your own expressions and print them. The depth of the facial marks are .04", that seems to reliably print well. The ears of the head can be printed at just about any resolution. You might need to size them up or down by 1% to get them to fit snugly depending on your settings. They should just press in with finger force and stay there. All pictures are taken with a 1:1 scale model. I didn't do any sort of work to them to make them look nice, that's how they came off the printer. I think on a larger Lucky 13 they'll look way better right off the printer.