Stronger Driver for wind-up bathtub boat v5
by mikedmor · via Printables
| Format | STL |
| Category | Mechanical |
| License | CC BY |
| Triangles | 1.1k |
| Uploaded | Jul 8, 2023 |
⬇ 113 downloads
❤ 10 likes
👁 402 views
Description
Mike's wind-up bathtub boat is an amazing model that was very well designed. However I ran into an issue with the driver due to printing using an 0.6mm nozzle. It seems that with these printer settings the driver arms are only getting a single line of filament which breaks after 2-3 uses. This improved version makes the arms a little bit thicker to prevent that from happening as often and might also improve its durability when using an 0.4mm nozzle, but has not been tested. Recommended to print with 100% infill for the best results.
AI Analysis: This object is a mechanical component designed for a wind-up bathtub boat, featuring a spiral structure with gears that allow it to function as a driver. The central circular part has a hole for mounting, and the overall design includes a rectangular block that connects to the spiral arms, which are shaped to rotate and propel the boat. Notable features include the spiral shape and the gear mechanism that enables the boat to move.
Originally published on Printables
