T-nut M3 drop-in rotating V-Slot

T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut: https://www.thingiverse.com/thing:3366563 Fits for most of the printers based on V-Slot, e.g. Creality (CR-10, Ender 3, Ender 5), Tevo (Tarantula, Tornado), Tronxy (X1, X3, X5S) and many more Put it in the profile slot and turn the bolt - it will turn and find its locking position. Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs A decent set of M3 hex bolts and nuts can be found on Banggood: https://www.banggood.com/custlink/KG3vEvGOIp Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 100% Filament: Any PETG/ABS Any Notes: Print very slow around 10 mm/s with a little (if single nut) or no cooling (batch) ideally with PETG or ABS, as those are not so brittle as PLA. For best results and strength set in Cura: Top Layers: 1000 Bottom Layers: 0 Top/Bottom Pattern: Concentric Category: 3D Printer Parts