Tak PrintABlok - A Beautiful Strategy Board Game

Tak is a beautiful game for 2 players where players attempt to build a road across the board from either side to the side opposite. On their turn, players can place a piece or move a stack of pieces, dropping at least one as they go. This PrintABlok version of the board uses pieces from PrintAQuest, the Modular Adventure Game . At regular size this is a travel version of Tak. If you'd like a more regular version, scale up everything 150% when you print it. Recommended Print Settings: 0.16mm layer height at most 3 walls/shells Print connectors in PetG. (What ever filament you want for the rest.) To make your Tak PrintABlok board: 3D Print the Following: 2x P102 PrintABlok -12 Standard Connectors.stl in PetG (Optional from the Parts Folder) 2x 102s_Slip_Connector.stl in PetG Tak PrintABlok-Plate 1-6 (Optional) 924 Box 8x8x2.stl (Optional) 2x Tak PrintABlok Piece Container.stl (Optional) Tak PrintABlok-8x8 Tak Box Insert.stl Assemble according to the build illustrations. (The yellow connecting lines are where “H” type connectors should be used.) Build the walls: 📷 Image redacted — claim this model to add your own media Assemble the Floor: 📷 Image redacted — claim this model to add your own media Add the Walls: 📷 Image redacted — claim this model to add your own media Shrubbery: 📷 Image redacted — claim this model to add your own media (Optional) Put the box insert in the box. Put 2 of the piece containers in the box. Put 2 slip connectors and 2 H connectors in the top connector holes of the box. Put the board on the box like a lid: 📷 Image redacted — claim this model to add your own media Complete: 📷 Image redacted — claim this model to add your own media