Tamagotchi Paradise Pal - Solder Free DIYTamagotchi Paradise UART Adapter

Meet the Paradise Pal! A cute little open source paradise to UART adapter made for people that want to make their own but don't want to (or can't) solder wires, all using off the shelf and 3d printed parts. To make the connections, it uses Mill-Max pin receptacles. You can buy them here (Canadian link, remember to select your own country before buying) https://www.digikey.ca/en/products/detail/mill-max-manufacturing-corp/0284-0-15-15-16-27-10-0/433449 Of course, you will also need jumper cables (the receptacles interface with male dupont jumpers, but your UART adapter may need male or female jumpers.) and a UART adapter, of course (I use a super cheap one off Aliexpress) Note: The default file was created with powder based printing in mind. (SLS or MJF) I included a file with tighter tolerances for resin printing as well as a step file for those who wish to tweak the tolerances to fit their printing tech of choice. Also, if you find any problems with the model, message me on Discord! 474703566167080961