Tamiya M03 - FF02 - TL01 Short 18650 Lipo 7.4v Adapter

We race with 3000kv F540 brushless sensorless motor and cheap 35A/45A Aliexpress ESC locally. These have been suprisingly robust, in 10 years we have had maybe 5 that has broken. We use these cheap combos in everything. During testing have these 18650 battery packs been just as fast as normal LiPo's. So many have bought them now. This will make them fit old oval M-chassi, FF02 and TL01. I will make for M05 later, since I have 6 of them also. Need 2x M3x20mm and 2x M3x25mm and 6 M3 nuts. Getting it fitted is pretty straight forward. Take out old stuff on chassi, insert M3 nuts and press them into chassi. Then just assemble as shown. Batteri is pressfit into right side holder with no play sideways. You can also put weight inside battery opening to get optimum placment for tuning and adjustment. The white print is prototype, did not bother changing filament.... Was 4 different designs before I was happy with results. Have published last 2 designs. Only difference between them is visually. I use V4 on mine in pictures. Printed in Elegoo PLA+ with 3 wall, 3 top and bottom layers and 20% cubic infill, sliced with Cura, Printed on a very modified Anycubic Kobra 2 Neo. 210 degrees hotend and 60 degrees bed and 250mm/s printspeed and 10 000 acceleration. Use these files as you please, print it, sell it, modify it. Anything goes! These are the batteries I ordered. https://www.aliexpress.com/item/1005010433446102.html These are the Brushless Combo we use now. (In this car it is mounted with ancient Hobbywing EzRun 3000kv kit, It is 10+ years old!) https://www.aliexpress.com/item/1005006742987156.html Since I was so lucky and honored that my last design for this Tamiya M03-FF02 was a featured design, I will only release this on Thingiverse! Thank you, Thingiverse and Luis Cordoba! I am very humbled and proud by your words!