Tandy 1000HX/EX 4 card expansion lid flat style

By using the Tandy to 2 ISA card adapters available on ebay with the OEM memory PLUS card you can have 4 cards Vs 3 in the HX/EX. This housing goes over the card stack in place of the flat lid. If you place the outward facing side of each part down on a medium grain PEI sheet you will get a wrinkle finish close to the stock case finish. Use supports on the base around the tab on the front edge where the lid engages the case facing toward the front of the machine. Post your build! Let me know if you find any issues. If you have a filament color match you like please share. Best color match I found is: https://a.co/d/04T13Mfx