Temp Tower | Temperature Test | Stringing and Bridging Probe (8 Levels) FIXED

Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front - Several filigree datails - No temperature labeling, as this varies according to the material anyway - A large base for good bed adhesion 📷 Image redacted — claim this model to add your own media The individual segments are 10mm high, therefore every 10mm the temperature change can be set with the M104 S… command.