Tesla Cybertruck

3D print your favourite electric truck for less then your pre-payment of the real thing you will have to wait for quite some time. All parts are printed without support. Wheels are spinning if you use the right parts, which are listed below. Tyres are printed from TPU, all other parts PLA or any other material of your choice. this is a repost of https://www.thingiverse.com/thing:4063298 Overall length (if you don't scale the model): 196 mm / 7,7" Scale: 1:30 8x brass insert M3 ruthex 4x M3x6 (chassis and body) 4x M3x14 (wheels) 4x polyamide washer (wheels) superglue (for windows) loctite (wheel screws) This is a remix from Greg Bejtlich's 3D model on grabcad.com amazon (EU) insert M3: https://www.amazon.de/Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile-Ultraschall/dp/B07YSRGZ9N/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ruthex+m3&qid=1587704029&sr=8-5 amazon (US) insert M3: https://www.amazon.com/dp/B00Y20YLKY/ref=cm_sw_r_tw_dp_U_x_GCduEbP665W7R Jan., 12th, 2020: updated "black_chassis_front.stl" with more clearance for AT tyres Jan., 19th, 2020: updated "black_chassis_rear.stl" and "silver_body_rear.stl" to fix the imperfection where the wall thickness on the old body part at one spot near the rear wheel well was so small that there would be a hole after printing. The hole can be seen on some of the pictures. Your model will not have that if you download the new files. March 8th, 2020: fixed un-attached geometry on AT tyres left/right April 17th, 2020: fixed un-attached geometry on black_chassis_front Print Settings Printer: Prusa i3 Mk3 Rafts: No Supports: No Resolution: 0.2 mm Infill: 8% Filament brand: any Filament color: silver / matte black Filament material: PLA / TPU