Textured Vase Zigzag (vase mode)

A geometric vase with a bold, iconic zigzag pattern. This design plays with your perception through its angular motif that creates visual movement across the surface. The zigzag lines flow seamlessly across the entire form, creating a mesmerizing effect that keeps drawing your eye back. Its robust appearance fits perfectly in an industrial or modern interior. Place it somewhere it can be seen, because this vase truly deserves a prominent spot in your home. Specifications Size: 11.2 x 17 cm (diameter x height) Print time: 3 - 4 hours (100% scale) Resizable: yes, in your slicer. 3D Model Type: SOLID body (not hollow inside, specifically designed for vase mode) Printing technique: FDM / FFF-only File type: STL Recommended materials: PLA, PETG Recommended slicer: Prusaslicer, Cura, Bambu Studio, Orca Slicer, Creality Slicer, Simplify3D Print difficulty: easy Recommended nozzle diameter and print settings For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill. Slicer setting: vase mode / spiralize outer contours ENABLED Nozzle diameter: 0.8mm, 1mm, or larger Bottom layers: 8 Perimeter speed range: 15 - 30 mm/s Layer height range: 0.3 mm - 0.5 mm Extrusion width / wall thickness range: 1mm, 1.2mm or 1.4mm+ Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion. License info: PERSONAL USE ONLY, unless you have a commercial license.