The Hairy Lion

A Lifelike 3D-Printable Lion Model Printing Recommendations: PLA, 0.2 mm layer hight, no additional supports needed, 15 % infill, 2 perimeters. You can also test your printers bridging performance with the model. Remark: I reuploaded this design. I claim no rights to this wonderful model. Just wanted to share it with you as best I can. Tipp: This little project is a hit for (children's) birthday parties too. Each child/guest can style their own and will have a blast! Here's a brief description of the postprocessing-steps to make the lion look really lifelike. Step 1: Print this model at any scale you like (several STL's to choose from). 📷 Image redacted — claim this model to add your own media Step 2: Remove the sacrificial wall which connects to the hairs with sharp scissors (please don't use a knife, it will rip off the hairs) as close to the wall as possible. You may want to cut and remove parts of the wall step by step. 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Step 3: Use a hot air hairdryer or heatgun to soften and dress the hairs. Done! IXPatch's tipp (see comments): “ If you're struggling with styling the mane: try dunking the lion into hot water upside-down, pull it back out, wait a moment (so you don't burn yourself), then just press the hair down.” 📷 Image redacted — claim this model to add your own media Hope you enjoy printing and styling this gorgeous model. Happy printing!