The Handsome Cableorganizer

You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 This Cable Organizer has some improvements and advantages compared to the existing ones. Big Version (90mm) for up to 2m Cables the regular Mini Version (63mm) is for USB-C Only up to 1m Cable. UPDATES 28.01.22 > Added New Caps Designs (Plane and Fingerhutch) 31.02.22 > Added the Mini Version and New Caps (Plane and Fingerhutch) and I added a Mini Version with no Bridge to get in other Cables with bigger Plug 04.03.22 > New Mini version 1.3 with improved tolerances added. That some makers had reported problems. The Design The cables are better protected against cable breakage due to excessive bending during winding Winding and unwinding is much easier due to a larger spool plate. Nice and handsome 😎 Attention was paid to easy printability without support material. Print instructions Simple print! No support needed! 10% Gyroid infill is sufficient! PLA and PETG gives a very good results on 0.3mm for the Mini you need at least 0.2mm of course with original Prusament! ;-) Happy Printing!!!