The Ickle Barons' War

IMPORTANT * The file "TROOPS - BASE 20X15- HOBELARS" had a error that I failed to notice. Its fixed now, and replace with the file "TROOPS - BASE 20X15- HOBELARS -FIXED". Apologies to anyone who had a failure with that print. Hi there. Here we have my 3.4mm 13th century English warfare miniatures and 1/600 castle for fighting battles or sieges I tend to print these directly on the buildplate without supports and live with the distortion of the first few layers and clean up the over exposed base layers with a knife or sandpaper. Lift and support for cleaner print. Everything has been designed to print without supports, there are a couple of exceptions and are marked with "NEEDS SUPPORTS" in the filename. The hollowed version of each castle part should print fine without supports but it probably wouldn't hurt to have some supports on the inside. Printing the "hollowed" parts directly on the buildplate will result in a small amount of resin being trapped and subsequently release when the model is removed from buildplate - i'm careful with my removal so I can pour the resin back into a container.....because I'm broke ;) The castle walls and towers have holes for magnets sized 3x1.5mm. They fit well for me but depending on you settings you might need to ream them out with a drill bit if they are too tight. I've tried my hardest to make sure everything will print well but there's just too many files to test print them all. This is an ongoing project and if you have any feedback/suggestions regarding the project or want to keep up to date with what I'm doing then please head to https://www.facebook.com/groups/986868009924718 Feel free to tip so I can afford resin to test print @ https://buymeacoffee.com/wozname Ive got some other stuff for sale on https://www.wargaming3d.com/vendor/wozname/ Love to see what you guys do with them. Cheers