The Ultimate Cereal Container Filament Drybox Nest Remix

I did the nesting and cut some parts in half so you done have to. My plan is to use the labels that come with the containers and just rely on color changing desicant for now. Didn't include the bottom cap because for now I am going to use the caps that come on the cereal containers, carefull cut the tab off so they sit flat. I attached Mark's drill guide jig for the coupler hole, use that so more of his accessories will work in the future. Also attached his base cover cap for desiccant storage. Rotate the complete nest 45 degrees and it will fit on a 200mm bed. Can help stay away from the cooler edges of an ender 3's bed. Maybe print the halves just to minimize waste if you have an old @ss printer like me haha. Also made some mods so supports, or brims/rafts are not needed. I cut the axles down the length not just to negate supports but to change the print orientation and make the bearing pegs stronger. Added little dowels to put between the axle halves. Should be able to pop the dowels in, push the halves together, then press the bearings on. might need some sanding to make sure the filament roll moves smoothly. Last but least, I split the nest in half for those of you with small print beds. There are extra dowels to line up the halves. I don't want to steal any thunder here since this is not my design. GunplaMark put in the design effort for this awesome system. Go to his page for all the optional print files and instructions. https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox/files Here is the BOM from Mark's original. Storage containers: https://amzn.to/4f6PgdU Bearings: https://amzn.to/4l9Lrrp Bowden couplers: https://amzn.to/3A3yBI3 Desiccant: https://amzn.to/3YgGhkA 5-21-25 Update, the coupler cap had an error so I drew a new one. I've updated the files and attached my new coupler cap. Last, I include extra versions of the STL's with break away tabs like revel model kits. 5-22-25 update, having tabs to tie parts together worked pretty well for me. I will theave the no tabe versions so you can choose.