Thin layers scraper storage case

Protected storage for 3 round scrapers. Keep them clean, protected, and ready to use. Designed this case as I wanted to keep a couple scrapers in reserve so I wouldn't need to switch filaments or take the time to print just to get a new scraper. Stores three extra scrapers at the ready, away from dust, oil, and protected from damage to the scraper edge. Designed for the thin layers scraper by sh, but should fit any remixes with similar dimensions. Features: Raised internal bottom platform to protect the scrapers edge Storage for 3 scrapers (less if the remixed scraper is taller than the original thin layers scraper ) Central shaft to prevent bumping the scraping edge on the inside face Quick half-turn threaded lid Knurling on the main body Embossed lettering on the lid Good companion piece to the scraper holster . You may need to thread the lid a couple times to work it in and make the action smooth. Examples are printed in PLA with a layer height of 0.12mm, 2 walls, and 15% gyroid infill. Other settings may work fine, though are not tested. Print with the top and bottom faces on the build plate (your slicer's auto-orient option should take care of this).