Thinner Yeethammer Catch

I was experiencing some issues getting my yeethammer to catch when priming, it seemed that the plunger rod wouldnt move far enough back. So, I modified the original catch to be slightly thinner where the plunger rod catches so that it would engage sooner and rectify my issue. I maintained the thickness of the catch in evey other area to ensure that it would still be held in place by the stock behind it. Print at 100% infill! I printed with the slanted face oriented down and the thin side facing up, using support to ensure proper formation of the spring hole. If you print with the other face up (which should still be fine) you wont need support.