This is Fine Dog Remix

I work in the tech industry and this meme/comic, much like everyone else, has become a visual representation of the chaos we are subjected to on the daily. I had sought out to make something special for my coworkers and decided I would make my own take on this piece. Here are the details of the changes I made as I wanted it to more closely resemble the comic... EDITS MADE TO DOG: Added smile Changed nose some Added the black strip to his hat Changed his eye shape Changed his arms, making them more natural Added hands to rest in his legs like in the comic (also helps with better printing) NEW ADDS: Created a new base with cut-outs of the individual pieces, which allows for pressure fitting of printed pieces Created new speech bubble that is the same shape and font used within the original comic Added more flames and changed composition for more visual impact I printed this with a Bambu Labs X1 Carbon printer, using a single AMS (allows for four color prints). There were changes that I made to the slicer, but I won't get into those details as those items will vary greatly on experience/slicers used. I have multiple files that will allow for MMU (multi-material) prints. Note that you may need to separate shells within your slicer to do so. FILAMENT NOTES: I used PLA for all pieces (details and links below); also used clear PET-G as the top layer on supports for the flames which allowed for very beautiful bottom layers. BASE: Black Glitter PLA Speech bubble: Natural (clear), Black, and White PLA Chair/Table/Hat: Brown PLA Mug: Stone Marble PLA Dog: Tan, Black, White PLA Flames: Yellow and Orange PLA and clear PET-G for top layer of supports ADDITIONAL PRINTING POINTERS: Speech Bubble: In order to achieve the stick to remain clear and the speech bubble outline to not lose it's shape, I had to actually leave the pieces separated within the Bambu Labs slicer but place them slightly on top of one another. So I have included the separate speech bubble pieces in the event other slicers have the same experience. Fire was printed laying down, with the above note of using PET-G as the top layer on the support. Please respect the Creative Commons licensing, as this is not approved to be sold in any format. ASSEMBLY NOTES: - The various flames are inserted via one corner first then pushed and rocked down via the other side in order to pressure fit into their respective places. - I used Gorilla Glue Super Glue to permanently adhere the pieces in place AFTER test fitment. Placed just a couple of drops/small line in each respective hole within the base as well as a small dot on the bottom of the mug to adhere it to the table. Links for filament: Black Glitter PLA: https://a.co/d/bqyutzh Yellow PLA: https://a.co/d/4QwmVSE Orange PLA: https://a.co/d/6pmjSfa Brown PLA: https://a.co/d/c11qDMp Tan PLA: https://a.co/d/jajHU5W Stone PLA: https://a.co/d/eHBaeEX Print Settings Printer: Bambu Labs X1 Carbon Rafts: No Supports: Yes Infill: 20 Filament: See Comments PLA See comments Category: Sculptures