Tiny PCB workstation

I made this because I couldn't find a smaller version of the base frame that fit my print bed. I also didn't need it to be massive like the original and a faster print time. This works for me with the same acupuncture needle probes and I've been able to flash a few Tuya chips this way. The vice is made by mdkendall and the link is https://www.printables.com/model/133490-2inch-desktop-vise The probe and the probe stands are made by giufini and the link is https://www.printables.com/model/351270-pcb-workstation-with-nano-probes I would suggest trying out the needle probe with no support and adjustment knob made by blinkybill and the link is https://www.thingiverse.com/thing:4592185/files This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5vNeCkHPFUT-small-pcb-holder/edit?sharecode=V73HihkRphiBYyvMsAfRpy2Cu4twX9f9VhLQdm2tAD4 . Print Settings Printer Brand: Dremel Digilab Printer: 3D20 Rafts: Yes Supports: Yes Resolution: 100 Infill: 20 Filament: inland PLA grey Notes: I'm still dialing the printer in but these worked well. Post-Printing ============= I'm going to assume your printer is better than mine and if the holes are a little bigger than expected, a little electrical tape or any tape around the stem will help. I did have to sand the vertical stem of the crane to fit the crane base with handle. How I Designed This This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5vNeCkHPFUTA Category: Electronics