Train Benchy

This is a simple 3D model based on the Benchy concept. It requires supports, so you can test your printer's support capabilities too. Below, you can see some things to look for in the print. Rounded Faces Test how your printer does with built-up rounded faces, overhanging rounded faces, and straight rounded faces. 📷 Image redacted — claim this model to add your own media Overhanging Travel Test how your 3D printer does on overhanging travel (drool). 📷 Image redacted — claim this model to add your own media Overhangs and Arches Test your printer's capability to print overhangs and arches. 📷 Image redacted — claim this model to add your own media Symmetrical Model Test your printer's levelness and see how it does as far as skew. 📷 Image redacted — claim this model to add your own media Sloped Surfaces See how good your printer is at printing slopes. The smokestack is an inverted slope, while the cowcatcher is a typical one. 📷 Image redacted — claim this model to add your own media Bridging Find out how good your printer is at bridging. The bottom overhang can be printed with supports, but the top overhang should be printed without them. 📷 Image redacted — claim this model to add your own media Enjoy the model, and happy printing!