TS101 Box

What we will need: - 6x M3x20 screw - 1x M3x14 screws - 1x M3 hex nut - 1x 608 bearing - All printed files (soldering wire spool; clampers are needed 2 times) - Glue (optional) Assembly Instructions for the TS101 Box - Insert the 608 bearing into the holder and secure it with 1 M3x14 screw and an M3 hex nut . - Place the upper inside part into the top part (with the logo). Optionally, use a small amount of glue to secure it in place. - Secure the 2 clampers to the box using 2 M6x20 screws . Tighten them just enough so the clampers can spin freely. - Place the lower inside part into the bottom part . Optionally, use a small amount of glue to secure it in place. - Assemble the top part and bottom part by securing them with 2 M3x20 screws . Tighten them evenly, but don’t overtighten to avoid cracking the parts and make sure they spin smoothly. - Screw in 2 M3x20 screws just enough so the clampers can lock the box.