Two way screw

This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with. Original idea from: https://youtu.be/cDfMI5ahbJI Some people have asked for various variations of the screw but I haven’t had time to make most of them. I uploaded a longer screw and shorter nuts which were the easiest requests to fulfill. These are untested so print at your own risk, although they should work since I just extended or shortened the original models Print instructions Category: Toys & Games Summary This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with. Original idea from: https://youtu.be/cDfMI5ahbJI Edit: Some people have asked for various variations of the screw but I haven’t had time to make most of them. I uploaded a longer screw and shorter nuts which were the easiest requests to fulfill. These are untested so print at your own risk, although they should work since I just extended or shortened the original models There are lots of remixes that might be what you’re looking for so check them out! Print Settings Printer Brand: MK3 Printer: Prusa i3 </div> Rafts: No Supports: No </div> Resolution: 0.15 Infill: 25% </div> Filament: Prusament PLA purple