UFS-094 More T-Handle Hex Allen Key Wrench

Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and download for free. Leave a comment if you like the design. Thanks Update Early Feb 2024: The original set of five handles was enough for the cheap Allen wrenches you get when you buy a 3D printer. And for this they did a great job, but there are more larger sizes out there. I decided to add 5mm through 10mm. To do this the handles have to get bigger. I started with these here: https://www.thingiverse.com/thing:4681814 . I added numbers to match the smaller wrenches. Then when I printed the first one, I found out that CagedChimp hadn't tested them and they were too small. So I scaled them up and they worked great. I added a 10mm size that was still missing. You will have to print the handle and the matching posts for the large sizes. Original post: When I got a second printer I got another set of free Allen wrenches. I decided to try out these handles. https://www.thingiverse.com/thing:951909. You can also find it here on Printables, https://www.printables.com/model/16557-t-handle . They fit well and hold the wrench, but didn't have the sizes marked on the handles. I modified these to have the wrench size marked on the top and on the side. This helps pick the correct wrench. If these work for you, then please give a like to the original designer. https://www.printables.com/model/16557-t-handle Print Settings Printer: Artillery Genius Prusa MK3S+ Rafts: No Supports: No Resolution: 0.2 Infill: 35% or more Filament: Any PLA Any Notes: Supports are not recommennded. May need a brim. Category: Hand Tools