Ultimate Exhaust system for K1 Max for NorcoT lid riser by TonyF

I'm using 100mm PLA-printed reducers with a 150mm bathroom exhaust fan, which I purchased from my local store. It's also available on AliExpress." Let me know if you'd like any further refinements! https://www.aliexpress.com/item/1005005990991070.html?spm=a2g0o.productlist.main.3.1e54xy7Nxy7Ni0&algo_pvid=571b5325-4207-4e43-8a0e-39900e1d142b&algo_exp_id=571b5325-4207-4e43-8a0e-39900e1d142b-1&pdp_ext_f=%7B%22order%22%3A%22736%22%2C%22eval%22%3A%221%22%7D&pdp_npi=4%40dis%21NZD%21176.05%2156.34%21%21%21709.31%21226.98%21%40%2112000035207127487%21sea%21NZ%21190563619%21X&curPageLogUid=SRD7goSenHWg&utparam-url=scene%3Asearch%7Cquery_from%3A You can buy 100mm fan too. I've included both STL files for the duct connector, one facing up and one facing down. IMPORTANT….!!!! I recommend printing this with PETG or ABS, but I printed mine with Hyper PLA at 80% infill to ensure strength. So far, it’s holding up well I have attached a snapshot of how I printed the object to save time and ensure a smooth print. I would recommend this method, but it's entirely up to you. Happy Printing lads….!!!