Umikot stand for Cafelat Robot

The stock 58mm Umikot works well with the Cafelat Robot - all except the stand. The Robot's deep basket requires longer needles than a typical portafilter basket. This deeper stand will allow you to store the Umikot with those longer needles. Other tips for using Umikot with the Robot: Use 105mm needles, such as the ‘10pcs 0.4mm 105mm’ option here: https://www.aliexpress.us/item/3256805858852242.html Cut 5 of your 10 needles to a total length of ~93-95mm (63-65mm needle + 30mm handle) Cut the remaining 5 needles to a total length of 85mm (55mm needle + 30mm handle) Use this stand with the “ Umikot58 - Base V2 30mm NoTab.stl " Base. The ‘short’ and ‘long’ tab options don't fit well on the Robot portafilter. For the best fit, scale all Umikot parts (Umikot58 Mech V2, Spin Ring, NoTab base, and this stand) to 94% on the X and Y axis. Leave Z axis scaling unchanged . Stock scaling fit OK but 94% is a more snug fit to the basket diameter. Screws and needles will have slightly tighter tolerances this way. I widened the needle holes slightly to make installation easier with a 1/16"/1.6mm drill bit.