Unified Drawer Organizer – Printable Panel Remix

This remix transforms the original modular drawer organizer into a fully unified, seamless system. The original design used printed junction pieces combined with user‑cut panels (wood, acrylic, etc.). I redesigned the panels themselves so they print with integrated tabs that slide directly into the existing grooves, creating the appearance of a single, continuous piece. All top edges are rounded for a softer, more finished look, and the printed panels eliminate the need for cutting or sourcing your own materials. In the example photos, I printed the full setup in a wood‑filled PLA that matches the drawer interior, giving it a clean, elegant, built‑in appearance. This remix keeps the flexibility of the original system while making the build process simpler, faster, and more visually cohesive. Material PLA or PLA+ works great Wood‑filled PLA gives a premium, furniture‑matched look PETG optional if you expect heavy use Layer Height 0.20 mm for general use 0.16 mm if you want extra‑smooth rounded edges Walls & Strength 2–3 perimeters 10–15% infill is plenty (panels are mostly cosmetic) Supports No supports needed for the panels For junction pieces, use standard support (not tree) Orientation Print upright with standard supports for best results Fit Notes Tabs are sized with a slight tolerance for typical PLA shrinkage If your printer runs tight, scale the panel X/Y only by 100.5–101% If your printer runs loose, scale down X/Y by 0.5%