Upgraded slider for Dracula's Tower Puzzle Box

This is a new slider for Dracula's Tower Puzzle Box that has the magnet insertion at the rear to provide a flat gliding surface across the base. You can see both versions in the picture. Printing instructions Print the .stl file as-oriented. A brim might help. Installation instructions Check the magnet orientation first! Push the magnets in from the rear of the slide into the two openings. It should be a tight squeeze, but you can optionally add a drop of glue in the opening end to keep it from moving. Other notes If you haven't glued the magnets in yet, you can use a small pry tool from the screw hole to push them out. Thank you to 3D Printy for an amazing model!