URAL 4320 32 Scale

Introduction: This is a 3D printable scale model of URAL 4320 , a heavy duty off-road capable truck designed by URAL for military and civilian operations. The model is designed in 1:32 scale for FDM 3D printing, which offers clean lines, curves, and easy assembly. The model is perfect for display, diorama builds, or collectors of vintage and military vehicles. Parts to Print: Print the parts as per the list. Use recommended colors for best results. Part Name Color Quantity Air Filter Black 1 Axle Black 3 Cab Color 1 CargoBed_Floor Color 1 CargoBed_Side_FR Color 1 CargoBed_Side_LH Color 1+1(mirror) CargoBed_Tailgate Color 1 Chassis_FRONT Black 1 Chassis_MID Black 1 Chassis_REAR Black 1 Dashboard Black 1 Door Handle Black 2 Grill Color 1 Hazard Light Red 4 Headlight White 2 Hood Color 1 Indicators Red 2 Rear View Mirror Black 1+1(mirror) Rim Color 7 Roof Color 1 Seats Black 1 Spare Tire Holder Black 1 Steering Wheel Black 1 Taillight Red 2 Tire Black(TPE) 7 Print Process: Position the parts in slicing software with orientations shown in the following images. Correct orientation is important for printing without additional support. Mirror CargoBed_Side_LH is to be mirrored for CargoBed_Side_RH, so mirror it in slicer software before slicing. Same goes for Rear View Mirror. If you have any issues regarding the files please comment. I will clarify asap. Truck Bed (Color): 📷 Image redacted — claim this model to add your own media Chassis (Black): 📷 Image redacted — claim this model to add your own media Interior and Details (Black): 📷 Image redacted — claim this model to add your own media Cab (Color): 📷 Image redacted — claim this model to add your own media Print Settings: The model is designed for printing with a 0.4 mm nozzle and requires no additional support. Use the printer-specific settings for the best quality prints. Layer Height: 0.2 mm Infill: 10–20% is sufficient Supports: Not required. Orient the parts as shown in the images above. Material: PLA recommended; Bed Adhesion: Brim for Hood and Roof. Post-Processing: The prints may require finishing before starting assembly. The process involves removing the in-built supports, stringing if present, and smoothing the rugged edges. Also the slots have tight clearance and may require to enlarge for smooth fit. You may require the following tools as per preference and availability: Cutter or Knife Sandpaper Small Files Adhesive (Instant Glue) Assembly Instructions: Watch the following video instructions for assembling the model. Check for tolerances before assembly. Use the appropriate tool for sizing the joint members. The press-fitting of some parts may require force. Use pliers or a vice for fitting, if necessary. Use adhesive for a firm joint. Take necessary caution while assembling.