USB-C Hub Adapter Mount for Cerise Two Pro Wired (EZQuest Slim 6-in-1)

🇬🇧 English This 3D-printed bracket allows you to mount an EZQuest USB-C Slim Gen 2 Hub 6-in-1 onto the Doppro Cerise Two Pro Wired desktop stand, turning it into a clean, all-in-one hub solution. Why this exists The Cerise Two Pro Wired has a built-in USB-C dock cable that is too thick to route through this adapter's slot. The piece is designed to work with a thinner replacement cable (Amazon B0FN3BVN47), which fits the cable slot perfectly. What you'll need 🔧 2 screws to remove from the Cerise Two Pro Wired — use a 3mm hex key (Allen wrench) 🔌 Replacement cable: Amazon FR – B0FN3BVN47 (the original cable is too thick and will not fit) 🖥️ Compatible hub: EZQuest USB-C Slim Gen 2 Hub 6-in-1 — Official product page 🛒 Stand: Doppro Cerise Two Pro Wired 🇫🇷 Français Cette pièce imprimée en 3D permet de fixer un hub USB-C slim ( EZQuest USB-C Slim Gen 2 Hub 6-en-1 ) sur le support de bureau Doppro Cerise Two Pro Wired , pour une installation propre et tout-en-un. Pourquoi cette pièce existe Le Cerise Two Pro Wired possède un câble USB-C intégré trop épais pour passer dans la fente de cet adaptateur. La pièce est conçue pour fonctionner avec un câble de remplacement plus fin (Amazon B0FN3BVN47), qui s'insère parfaitement. Ce dont vous aurez besoin 🔧 2 vis à démonter sur le Cerise Two Pro Wired — utiliser une clé hex de 3mm 🔌 Câble de remplacement : Amazon FR – B0FN3BVN47 (le câble d'origine est trop épais et ne passera pas) 🖥️ Hub compatible : EZQuest USB-C Slim Gen 2 Hub 6-en-1 — Fiche produit officielle 🛒 Support : Doppro Cerise Two Pro Wired 🖨️ Print Settings Material Printed in PA-GF (Glass-Filled Nylon) for maximum rigidity and durability Minimum recommended: PETG — the part sits outside the stand and is exposed to UV over time. PLA will degrade and warp. PA-CF or PA-GF if you want the stiffest result possible Supports Recommended: Enable supports for a cleaner finish, but the part will still work without them Other settings 0.2mm layer height 2+ perimeters / walls 15% infill minimum — Gyroid recommended