V2 Beverage Can Dispenser-Six 500ml cans

Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together once in place. I have mine stacked four-high in my refrigerator, but can also be used two-high on shorter shelves. PLEASE NOTE: While 16 oz. cans will technically fit in this Dispenser, they will probably NOT roll correctly. 500 ml cans are equivalent to 16.9 oz, so the 16 oz cans are smaller and will be able to twist and get stuck. There are two options for the Top. You can print the Tray-Top which is half height, which is most space efficient. Or you can print the Cover so that items can be stacked on the Dispenser to maximize space efficiency. (see Parts Legend in photos). I have included “full” versions so parts could be printed as single models on larger format printers. The assembled 6-can Dispenser is 7.23 inches wide x 15.75 inches deep x 3.56 inches high. (The cover only adds 0.03 inches to the overall height because it nests.) Note: The photos are NOT from the 500 ml version. I haven't printed this version yet. I created this on request based on the 12 oz version. I'll upload photos when I print some (and get some 500ml cans!). Printed in PLA. No supports required except for the bottom of the cross-strut in the front half. (see Make photo.) Please post your Likes and Makes if you like the design. Cheers!