V6 Mounts for Ender 3 V2 CoreXY (2nd Gen)

An integrated SRA toolhead mount for V6 and V6 Volcano hotends. Use bowden_v6_mount for a regular e3D V6 hotend. To attach the hotend use the mount cover: https://www.printables.com/model/214737-cr-10-heavy-duty-customisable-modular-e3d-v6-mount/files#preview.file.RVQdB. I had to shrink it ~0.5mm so it squeezes the hotend firmly. Use dde_volcano_mount for e3D V6 volcano hotend with BondTech BMG extruder or a Triangle-Lab clone (I've only tested with the clone but I assume its identical with the original). Both mounts need M3 heated inserts for the 4 screws that attach it to the SRA toolhead backplate, fan mounts and regular V6 hotend mount cover. Modified 5015 blower wings There are two variants, one for regular BL/3D Touch sensor and one for BIQU MicroProbe V2.0. Note: you will need to find maximums on X and Y axes because the blower wings are rather bulky. In my case I had to cut off around 5mm from the max. printable area. Print settings Print orientation and supports as in the picture. Printed with PTFE, 3-5 walls, ≥40% infill.