Velcro Mount for Ikea Skadis

A strong mount to attach Velcro / hook and loop loops and straps to IKEA SKÅDIS pegboards. It is a remix of the Velcro Clip by Pavel Riedl that has been adapted to work with Skadis T-Nuts for easy and secure installation on Skadis pegboards. Works with cinch straps as well as velcro tape from a roll. 📷 Image redacted — claim this model to add your own media Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. 📷 Image redacted — claim this model to add your own media BOM Qty Description Sourcing 1 M2.5x12mm (or longer) Socket Head Cap Screw Aliexpress 1 M2.5 DIN934 Hex Nut Aliexpress Printed Parts Qty Part Download 1 Velcro Mount (choose size and orientation) this project 1 Skadis T-Nut M2.5 Download here Sizes Files are available in the most common metric and imperial sizes and in vertical or horizontal orientation. Metric File Orientation Velcro Width Velcro Mount Vertical 8mm.stl Vertical 8mm Velcro Mount Vertical 10mm.stl Vertical 10mm Velcro Mount Vertical 12.5mm.stl Vertical 12.5mm Velcro Mount Vertical 15mm.stl Vertical 15mm Velcro Mount Vertical 16mm.stl Vertical 16mm Velcro Mount Vertical 20mm.stl Vertical 20mm Velcro Mount Vertical 25mm.stl Vertical 25mm Velcro Mount Vertical 30mm.stl Vertical 30mm Velcro Mount Vertical 50mm.stl Vertical 50mm Velcro Mount Horizontal 8mm.stl Horizontal 8mm Velcro Mount Horizontal 10mm.stl Horizontal 10mm Velcro Mount Horizontal 12.5mm.stl Horizontal 12.5mm Velcro Mount Horizontal 15mm.stl Horizontal 15mm Velcro Mount Horizontal 16mm.stl Horizontal 16mm Velcro Mount Horizontal 20mm.stl Horizontal 20mm Velcro Mount Horizontal 25mm.stl Horizontal 25mm Velcro Mount Horizontal 30mm.stl Horizontal 30mm Velcro Mount Horizontal 50mm.stl Horizontal 50mm Imperial File Orientation Velcro Width Velcro Mount Vertical 1_2in.stl Vertical ½ inch Velcro Mount Vertical 5_8in.stl Vertical 5/8 inch Velcro Mount Vertical 3_4in.stl Vertical ¾ inch Velcro Mount Vertical 1in.stl Vertical 1 inch Velcro Mount Vertical 1.5in.stl Vertical 1 ½ inch Velcro Mount Vertical 2in.stl Vertical 2 inch Velcro Mount Horizontal 1_2in.stl Horizontal ½ inch Velcro Mount Horizontal 5_8in.stl Horizontal 5/8 inch Velcro Mount Horizontal 3_4in.stl Horizontal ¾ inch Velcro Mount Horizontal 1in.stl Horizontal 1 inch Velcro Mount Horizontal 1.5in.stl Horizontal 1 ½ inch Velcro Mount Horizontal 2in.stl Horizontal 2 inch Printing Print the parts in the original orientation. All STL files are pre-rotated. Material: PLA, PETG, pretty much anything Layer height: 0.2mm Extrusion width: 0.4mm Perimeters: 7 (important for super strength) Infill: 0% / doesn't matter 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Assembly Insert the M2.5 nut into the Skadis T-Nut. Stick the M2.5x12mm screw through the Velcro Mount. Thread the T-Nut onto the screw and leave it loose so that the T-Nut can freely rotate. Position the T-Nut in the vertical orientation and stick the T-Nut through the Skadis peg board. Us the alignment guides on the back of the mount to align the part in the center of the peg board hole. Tighten the screw. The T-Nut will orient itself in the horizontal position and provide a very secure hold. 📷 Image redacted — claim this model to add your own media