Veritas Router Plane Blade Storage Box

Remake of Rugged Box (Parametric) by Whity Material PETG, ASA, ABS, etc (Latch is recommended in PETG) Additional Parts 2 - M3x30mm screws (Latch) 1 - M3x50mm screw (Rear Hinge, two smaller screws could probably be used and inserted from opposite directions) 1 - 3/8 to 1/2 inch thick (10mm - 12mm) piece of foam for lid Assembly Print the parts, assemble with screws and insert the foam into the lid. Glue for the foam may be required. Seal is optional.