Vise with bench attachment

I use the Fast-Operation Vise for soldering circuit boards but wanted to lock down the vise to my table. I generated two cutouts in the left and right base parts along with a 3mm hole to pin down the vise. This way you can attach the legs to the table and release the vise easily if needed. I did not include all the original STL files so grab them from here . Other than the two updated vise_base parts, all of the other components are unchanged. The leg is symmetrical so just print two. Included is one with a 6mm slot and another with a 4mm slot dependent on how you plan to attach. There is nothing complex with the attachment pins. I just used 4 ( 3mm x 16mm ) bolts but you could print a 3mm pin if desired. Let me know if there is feedback. I am always up for refining the design.