Volvo 850 Third Brake Light Cover

Basic, untextured model for the tail lamp cover on Volvo 850 wagons since they always break or go missing. I've made 2 variations, each having a version with or without the retaining clips. The tabbed model is based on the genuine part, while the extended version is slightly longer with the purpose of being flush against the rear glass in an effort to block light bleed. The retaining clips should be reinforced with adhesive. Alternatively, they can be printed and glued on separately. Please double check the fitment and location of the retaining clips on your tailgate panel before gluing them on. The clips can be found here or in my account: https://www.thingiverse.com/thing:7187514 Dimensions were measured from a cover that is currently on my wagon, so they may be slightly off. You should comment so if that's the case with details in order for me to improve the design. The depth may need to be modified to form a complete seal around the brake lamp due to warping of the tailgate cover it sits on. For ease of printing, I would use the side facing the front of the car as the base. Supports may be needed around the fillet for the first few layers. I recommend using UV and heat-resistant filaments.