Wall Mount hanger compatible with Sony KDL-32W705B

This is a 3D-printable bracket designed to let you hang your Sony Bravia TV using its own metal table-top stand. Many older Sony models (W6 and W7 series) were designed so the stand doubles as the wall mount, but the original plastic attachment hardware is often lost or costs $120+ on eBay. I modeled this reinforced version to bridge that gap. I have personally used two (2) of these to hang my 32-inch KDL-32W705B. If you are hanging a larger or heavier model, I strongly recommend printing and using three (3) brackets to distribute the weight across your wall studs. Orientation: IMPORTANT: Print on the side. Lay the model flat on its side face so the layer lines wrap around the hook. This ensures the weight of the TV isn't trying to peel the layers apart. Disclaimer: Use this at your own risk. This is a DIY 3D-printed part. I am not responsible for any damage to your TV, wall, or floor if the part fails due to poor print quality, incorrect material choice, or improper installation.