Webcam/Phone support for Prusa Enclosure

Context I had an older Samsung Galaxy S10 phone lying around, and I had the same thought as Chmax – to find a way to put it in the enclosure; to further use it together with Prusa Connect and the Camera feature! Changes I had to do a series of small adjustments to adapt to the Samsung Galaxy S10' size, and after printing one I had a couple of thoughts of further improvement to my likings: the base of the phone holder now has a cable guide and a stopper, so that the cable can stay in place, while the phone is connected or disconnected the supports that go round the phone are thicker and sturdier the supports have a wider part, designed to better hold the phone in place Printing it I've printed it on my Prusa MK4 in a Prusa Enclosure, in Black Matte PETG with 0.2 layer height, and everything worked out really well! You do not need to print supports for 3 out of 4 objects – use organic supports only for the Rod , and print it vertically! Special thanks This wouldn't have been possible without Chmax's initial design , based on Torpi's screw , HD_Creator's ball joint and Praik's S8 Phone holder – kudos & thank you very much for sharing your work!