Windowsill Coat Hanger and Umbrella Holder

A coat hanger and umbrella holder designed to be firmly taped to a windowsill. This makes it easy/nondestructive to install and detach. I didn't have a good spot to put my coat(s) or damp umbrella at work, so I made one. Use a reasonable amount of good, strong, and wide tape for the best results. The tape may still get pulled off on occasion depending on how many coats you pile on the hanger or if you pull the coats at a weird angle. Ideally, print these with PETG. Use plenty of perimeters and a higher infill density to maximize their strength/weight. For the umbrella holder, you'll also need two M4x16mm screws and two M4 nuts to screw in the attachment, which is printed separately to avoid having to print any huge overhangs.