Working Cannon (Print-In-Place)

This is a working cannon. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need or shoot paper balls, peas, etc. Print it as a toy for your kids, grandkids, or present it to friends as a gift. Some use it to launch cat treats for the cats... In the base carriage, there are identations to store 2 cannon balls. (Better print two). Use it as a permanent display on your desk, ready to fidget or defend yourself whenever needed. Update October 2023: You find a keychain version with ball holder here . Update 12th of December: Added a “thick plunger” version as requested by fabrizio-the-frog and yume . It has a way thicker plunger only in case you have issues with the normal diameter plunger. Update 13th of September: Added the tiny keychain cannon . It holds one ball securely in place and is still fully functional. In case you can print this version, try also the tiny version! Update 8th of July: Added the autoloading cannon remix. It can load two balls and you dont need to prime the cannon anymore before putting the cannon balls in: 📷 Image redacted — claim this model to add your own media Update 1st of July: I added the “big gun” models (idea from nilson_fx ): With those, you can shoot 23mm nerf rival ammunition or the included “big gun” cannon ball. Printing Print it without supports and as oriented in the STL. (The cannon and front of the carriage should point down towards the print bed.) The cannon is fully print-in-place: No assembly required, just remove the cannon from the print bed and fire away! (The hinge and piston might need some initial movement to get going.) The cannon is designed for easy printing , so bed adhesion should not be an issue. The spring (inside the cannon) is 3D printed, and works well also if you print in PLA . There is a hinge included for aiming. It might need some initial movement to get going. 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Models included You can select a strong or weak spring (weak one for kids, to make it easier to pull and reduce potential injury). New: There is also a third “big gun” version, able to shoot 23mm nerf rival ammunition or the included bigger cannon ball. For each version, there are three models: The cannon only, you can also print this as initial test for your calibration The cannon without wheels Then cannon with wheels. The wheels dont turn, but look cool. They also print without support material There is also a cannon ball included 📷 Image redacted — claim this model to add your own media Thanks Thanks to iqless for the picture of his “cannon-only” print, and thanks to MatthewHarles for the “cannon-only" two color print! Thanks to deadhawke for his picture of the black cannon being pulled by hand. Thanks to gerd for his photo of the yellow cannon with yellow/blue cannon balls. Thanks to collisto for the photo of the bling-bling white/golden cannon. Thanks to nilson_fx to pointing out an issue in the cannon design which might have lead to printing issues. Also he had the idea to do a bigger version. Thanks to makeshift-meatballs to point out that the “big gun” model was not correctly uploaded. Thanks to revy2k for his picture of the red Big Gun scaled to 230%, his visual deterrent, alongside a normal cannon. Thanks to rockzz22 for the picture of the collection of his white and green cannons. Thanks to matemaciek for his picture of the translucent orange and blue cannons. Thanks to Chris for his picture of the print bed full of cannons in dark red glitter. Thanks to aroet for his picture of cannon ball and hand-held cannon mass production. Videos featuring this model Thanks to lostintech to feature this model in his youtube channel ! Thanks to +Ultra for his TikTok video of the cannon. Thanks to MakerTeam for their print video on youtube . Troubleshooting In case the hinge is fused (not turning) or the spring doesn't work, try slicing with PrusaSlicer. E.g. Cura seems to have trouble with print-in-place hinges. Other models There is now a target to shoot at available from mattstudio ! 📷 Image redacted — claim this model to add your own media I uploaded a new print-in-place spring-driven model, the slot machine ! 📷 Image redacted — claim this model to add your own media There are alternative rocket projectiles from Repoholy available: 📷 Image redacted — claim this model to add your own media In case you need a pirate coaster along with the cannon, look for jakes coasters . 📷 Image redacted — claim this model to add your own media There are Child- & pet-safe cannonballs from DP design available: 📷 Image redacted — claim this model to add your own media See also my other fidget models, e.g. the fidget rings or the new fidget flaps : 📷 Image redacted — claim this model to add your own media I experimented more with the spring mechanism, and created also a finger trainer from them: 📷 Image redacted — claim this model to add your own media There are more print-in-place models, e.g. the spinning coaster: 📷 Image redacted — claim this model to add your own media