Works Bell Rapfix Elock Holder.

This will hold the Works Bell hub lock. Know as the Rapfix Elock. There are a few different mounting options. I also have a one with no hole or clip to come up with your own way of mounting it. The clipped version will fit onto the Modifry bracket for the cup holder in a Honda S2000. You will need to replace the mount on the Modifry bracket with mine. If you have a cup holder it will still work but be tight. I have 3 version of the clip mount with mine being the offset to the left. I have a version with 4 3.5mm holes at 39mm on center on the X axis and 30mm on center Y. The holes on the back of the mount are 5 mm sunk about 5mm to fit around the Modifry bracket post with 3.5mm countersunk 2mm on the top side. You can also cut the holder so you can print it in 2 parts flat. You will get stepping from the layer lines gettig some really flat lines near the top. If you fill in the letters all the way with 2 different colors this can be a very long print in high quality as one piece. At an angle you are looking at 200 plus color changes with thin layers. I make mine solid with PETG. I have tried up right yet just angled and flat. I did make the letters more raised in this version so the base doesn't bleed into the K. You will really want to zoom in on the slicer to paint the letters all the way.