Wyrmspan + Dragon Academy Insert

This is a remix of an excellent existing insert to add support for the new components added in the Dragon Academy expansion. Most of the components have been remodeled but they're still heavily based on the original upload. Unfortunately there's only just enough room for all of the cards without sleeves; it's likely that they could all fit in somewhere with sleeves on but that'd require a much more extensive remodel. I also haven't tested this with the deluxe components but I wouldn't like your chances; the extra space next to the player boards could be used for extra trays for these but I ran out of time and filament to design them. Print the following files from the original model: 2x Wyrmspan eggs coins - I use these for eggs and the new training tokens instead 1x Wyrmspan player tray Print these files from my remix: 1x Wyrmspan+Academy-CardMarket - makes the cutout on the top surface bigger to account for the new Round Tracker board. As said above, there's not enough room for sleeved cards, but it works very nicely if you split the original cards into two piles and have the new Dragon Academy cards in a separate third pile (for both dragons and caves) 1x Wyrmspan+Academy-GuildAndGuides - has been remodeled to fit all of the new Guild cards, the "how to play" and automa cards, the score pad, and an impractically small pencil. 1x Wyrmspan+Academy-Setup - for all of the objective tiles, the round marker, and the first player marker. It's designed to have the original and Dragon Academy objective tiles in two separate piles but you'll probably mix them all up anyway. 2x Wyrmspan+Academy-ShortResourceTray - I've got the extra coins and multiplier tokens in here, but you could put the new training tokens in here instead and keep the coins with the eggs as God intended. 2x Wyrmspan+Academy-ShortResourceTray OR 1x Wyrmspan+Academy-TallResourceTray, depending on your preference and how many friends you have. The tall tray might be better for the deluxe resources but I'd imagine it's still a tight fit; unfortunately all the other new stuff means there's only half as much space for resources than in the original model, but to make up for it I added fillets to make scooping the tokens out easier. Check the pictures for examples of how it all fits together; you should be able to get all of the boards, rules, and dragon facts in without any lid lift. Note that I'm still using the original card market in the pictures because the round tracker not quite fitting properly doesn't annoy me enough to print a brand new one (I just put the guild board down first instead). I used three walls and 15% gyroid infill; you could probably get away with less (I used lightning infill for prototyping and it was surprisingly sturdy) but the GuildsAndGuides tray is still pretty flimsy so I wouldn't recommend cheaping out on that one at least. I used eSun eMarble PLA. TODO when I have more free time and filament: The empty space next to the player boards could be useful for extra trays, especially for the deluxe components. The rounded corners on the new trays aren't quite the same radius as the originals. I can live with that but if enough people complain I might fix it. Rounded bottoms for the egg+coin tray, the training tokens are a bit annoying to scoop out of there. Individual player trays would be nice, as would separate trays per player for holding current resources