X-303 MMU Parts

Split up specific stls for printing with different colors in case you have an MMU or equivalent. -Lots of blue windows -Yellow and black on the missile launch doors (reused from BC-304) -White lettering on the front's sides -White lettering on the superstructure, further edited for ease of print but requires glue -Black space between the hangar doors -Blue hyperspace generators -Orange inside engine nozzle Why a million window boxes instead of a single flat blue sheet? Because I tried that and it didn't go so well as the window recesses are quite shallow. Original model by Martin Taichl. NOTE: PrusaSlicer 2.4.0 added the ability to paint models directly in the slicer which effectively obsoletes this way of doing things for most circumstances. I'd encourage you to take that route instead of downloading this. This is just here because it's how I did things before that great feature was added. Print instructions Make sure to drag in all the stls of a given part as a group into PrusaSlicer and then hit 'Yes' when prompted. To print the full X-303 model you still need to download Martin's fileset (the original model that this fileset is remixing). This fileset is just specific parts of the original model that have multiple colors. The name of the part being replaced comes before the double underscore in the filename of each part: xxx_-_x303_g_1_m __main .stl and xxx_-_x303_g_1_m __blue .stl together replace Martin's original xxx_-_x303_g_1_m.stl