Z- Anti Wobble Plates Ender 3 /V2/Pro

Creality 3D Printers do tend to have a wabble on the Z Climb You will need to print 2 sets per Z axis motor nut. it depends on how well your printer will be able to create these, You will need to do some clean up to get that perfect fit with no slop or bind up. After filed /sanded for that smooth operation you will assemble both and then glue the second set 90 degrees from each other. I used Dielectric grease as the lube but Lithium grease may be better. Things you may need threaded inserts or screws about m4 and tap it in.. there are 4 alignment / mounting holes that are 3mm you will use to mount the z screw nut to one side and then mount the block to the OG mounting holes/